Fiber Cement Contractors Based in Fair Oaks
Start with what Fair Oaks's climate and risk numbers say, then scroll to the 3 fiber cement siding installers based here for the businesses themselves.
Licenses checked · California Contractors State License Board
20.9 innormal precipitation a year
What Fair Oaks's climate asks of an exterior wall
Fair Oaks averages 20.9 inches of precipitation a year, with January the wettest month at 4.3 inches.
Fiber cement's cement-and-cellulose composition is engineered specifically for sustained moisture exposure like Fair Oaks sees, unlike a wood-based product left unprotected.
0.0 inches of snow most winters adds its own freeze-thaw cycling on top of the rain.
Data: NOAA National Centers for Environmental Information, U.S. Climate Normals 1991-2020 (annual/seasonal and monthly, by station) (1991-2020), from the nearest NOAA station 5.7 mi away.
Wildfire and hurricane risk near Fair Oaks
Fiber cement's noncombustible composition is exactly why it shows up by name in wildfire-focused building rules that reach as far as Fair Oaks.
A Relatively Moderate wildfire rating is worth a direct conversation about local wildfire construction requirements before you pick a material for a Fair Oaks home.
- Strong wind
- Very Low
- Hail
- Relatively Low
- Wildfire
- Relatively Moderate
Data: FEMA, National Risk Index for Natural Hazards - County-level table, v1.20 (v1.20, December 2025).
Fiber cement siding installers based in Fair Oaks
Sorted A to Z by business name.
American Dream Siding & Decking INC
Siding contractor
- License
- B General Building / C-61/D-41 Siding and Decking · 1027141
- Since
- 2017
- Expires
- Apr 30, 2027
- ZIP
- 95628
Nespa Exteriors INC
Siding contractor
- License
- C-61/D-41 Siding and Decking · 1159317
- Since
- 2026
- Expires
- Aug 31, 2028
- ZIP
- 95628
RLS Construction
Siding contractor
- License
- B General Building / C-17 Glazing / C-39 Roofing / C-54 Tile / C-61/D-41 Siding and Decking · 936098
- Since
- 2009
- Expires
- Aug 31, 2027
- ZIP
- 95628
Fiber cement questions worth asking before you sign
- Is this product factory-primed or factory-finished, and if primed, will painting happen inside the manufacturer's required window?
- What ground clearance and roofline clearance will the crew actually leave, and does it match the manufacturer's published minimums?
- How will the crew control silica dust when cutting, and what equipment are they using outdoors versus indoors?
- If this home is in a fire hazard zone, is the specific product and assembly rated for it, not just the base material?
- What does the substrate warranty cover, separately from any paint or finish warranty?
- Is this formulation built for {city}'s climate zone, or a generic nationwide version?