Fiber Cement Contractors Based in Rio Linda

3 fiber cement siding installers based in Rio Linda follow, further down the page.

Licenses checked · California Contractors State License Board

18.0 innormal precipitation a year

What Rio Linda's climate asks of an exterior wall

With January alone bringing 3.7 inches in a typical year, Rio Linda is the kind of climate manufacturers have in mind when they engineer a wet-climate formulation.

18.0 inches of total annual precipitation keeps every seam, joint, and piece of flashing on a Rio Linda wall working hard.

Data: NOAA National Centers for Environmental Information, U.S. Climate Normals 1991-2020 (annual/seasonal and monthly, by station) (1991-2020), from the nearest NOAA station 8 mi away.

Wildfire and hurricane risk near Rio Linda

Two very different hazards for a Rio Linda homeowner to weigh, and fiber cement is one of the few common claddings that holds up against both at once.

Strong wind
Very Low
Hail
Relatively Low
Wildfire
Relatively Moderate

Data: FEMA, National Risk Index for Natural Hazards - County-level table, v1.20 (v1.20, December 2025).

Fiber cement siding installers based in Rio Linda

Sorted A to Z by business name.

  • Garcia Siding & Decking INC

    Siding contractor

    License
    C-61/D-41 Siding and Decking · 1129084
    Since
    2024
    Expires
    Nov 30, 2026
    ZIP
    95763
    Verify license
  • K G Scow Improvements

    Siding contractor

    License
    C-61/D-41 Siding and Decking · 763843
    Since
    1999
    Expires
    Jun 30, 2027
    ZIP
    95673
    Verify license
  • Pasquett Roofing INC

    Siding contractor

    License
    C-39 Roofing / C-61/D-41 Siding and Decking · 1010631
    Since
    2016
    Expires
    May 31, 2028
    ZIP
    95673
    Verify license

Fiber cement questions worth asking before you sign

  1. Is this product factory-primed or factory-finished, and if primed, will painting happen inside the manufacturer's required window?
  2. What ground clearance and roofline clearance will the crew actually leave, and does it match the manufacturer's published minimums?
  3. How will the crew control silica dust when cutting, and what equipment are they using outdoors versus indoors?
  4. If this home is in a fire hazard zone, is the specific product and assembly rated for it, not just the base material?
  5. What does the substrate warranty cover, separately from any paint or finish warranty?
  6. Is this formulation built for {city}'s climate zone, or a generic nationwide version?

More on California →

Other California cities with fiber cement pros

All cities in California →