Fiber Cement Contractors Based in San Jose
4 fiber cement siding installers based in San Jose follow, further down the page.
Licenses checked · California Contractors State License Board
16.1 innormal precipitation a year
Rainfall and moisture load in San Jose
With February alone bringing 3.2 inches in a typical year, San Jose is the kind of climate manufacturers have in mind when they engineer a wet-climate formulation.
16.1 inches of total annual precipitation keeps every seam, joint, and piece of flashing on a San Jose wall working hard.
Data: NOAA National Centers for Environmental Information, U.S. Climate Normals 1991-2020 (annual/seasonal and monthly, by station) (1991-2020), from the nearest NOAA station 6.1 mi away.
What FEMA's risk index shows for Santa Clara County
Fiber cement's noncombustible composition is exactly why it shows up by name in wildfire-focused building rules that reach as far as San Jose.
A Relatively Moderate wildfire rating is worth a direct conversation about local wildfire construction requirements before you pick a material for a San Jose home.
- Strong wind
- Very Low
- Hail
- Relatively Low
- Wildfire
- Relatively Moderate
Data: FEMA, National Risk Index for Natural Hazards - County-level table, v1.20 (v1.20, December 2025).
4 fiber cement siding installers based in San Jose, CA
Sorted A to Z by business name.
Bello Siding & Deck
Siding contractor
- License
- C-61/D-41 Siding and Decking · 1046548
- Since
- 2018
- Expires
- Nov 30, 2026
- ZIP
- 95123
Clean Roofing
Siding contractor
- License
- C-39 Roofing / C-61/D-41 Siding and Decking · 1034462
- Since
- 2017
- Expires
- Dec 31, 2027
- ZIP
- 95136
Coastal Lumber
Siding contractor
- License
- C-61/D-41 Siding and Decking · 637546
- Since
- 1992
- Expires
- Feb 29, 2028
- ZIP
- 95111
Good Vibes Roofing & Siding INC
Siding contractor
- License
- C-39 Roofing / C-61/D-41 Siding and Decking · 1084693
- Since
- 2021
- Expires
- Dec 31, 2027
- ZIP
- 95113
Fiber cement questions worth asking before you sign
- Is this product factory-primed or factory-finished, and if primed, will painting happen inside the manufacturer's required window?
- What ground clearance and roofline clearance will the crew actually leave, and does it match the manufacturer's published minimums?
- How will the crew control silica dust when cutting, and what equipment are they using outdoors versus indoors?
- If this home is in a fire hazard zone, is the specific product and assembly rated for it, not just the base material?
- What does the substrate warranty cover, separately from any paint or finish warranty?
- Is this formulation built for {city}'s climate zone, or a generic nationwide version?