Fiber Cement Contractors Based in Ansonia
Fire and moisture performance are why fiber cement gets specified around Ansonia in the first place; who actually installs it locally comes next. 3 fiber cement siding installers carry a Ansonia address in the state's own license file.
Licenses checked · Connecticut Department of Consumer Protection
52.0 innormal precipitation a year
Rainfall and moisture load in Ansonia
Ansonia averages 52.0 inches of precipitation a year, with October the wettest month at 5.0 inches.
Fiber cement's cement-and-cellulose composition is engineered specifically for sustained moisture exposure like Ansonia sees, unlike a wood-based product left unprotected.
Data: NOAA National Centers for Environmental Information, U.S. Climate Normals 1991-2020 (annual/seasonal and monthly, by station) (1991-2020), from the nearest NOAA station 1.2 mi away.
What FEMA's risk index shows for Naugatuck Valley Planning Region
Naugatuck Valley Planning Region carries a Relatively High hurricane rating and a Very Low wildfire rating on FEMA's National Risk Index.
Two very different hazards for a Ansonia homeowner to weigh, and fiber cement is one of the few common claddings that holds up against both at once.
- Strong wind
- Relatively High
- Hail
- Relatively Low
- Hurricane
- Relatively High
- Wildfire
- Very Low
Data: FEMA, National Risk Index for Natural Hazards - County-level table, v1.20 (v1.20, December 2025).
3 fiber cement siding installers based in Ansonia, CT
Sorted A to Z by business name.
Lewicki/Spenard's Roofing & Siding
Siding contractor
- License
- Home Improvement Contractor · 580678
- Since
- 2003
- Expires
- Mar 31, 2027
- ZIP
- 06401
Nick & Nicks Roofing, Siding & Windows
Siding contractor
- License
- Home Improvement Contractor · 640807
- Since
- 2014
- Expires
- Mar 31, 2027
- ZIP
- 06401
Valley Roofing & Siding INC
Siding contractor
- License
- Home Improvement Contractor · 502830
- Since
- 1999
- Expires
- Mar 31, 2027
- ZIP
- 06401
Fiber cement questions worth asking before you sign
- Is this product factory-primed or factory-finished, and if primed, will painting happen inside the manufacturer's required window?
- What ground clearance and roofline clearance will the crew actually leave, and does it match the manufacturer's published minimums?
- How will the crew control silica dust when cutting, and what equipment are they using outdoors versus indoors?
- If this home is in a fire hazard zone, is the specific product and assembly rated for it, not just the base material?
- What does the substrate warranty cover, separately from any paint or finish warranty?
- Is this formulation built for {city}'s climate zone, or a generic nationwide version?