Fiber Cement Contractors Based in Bakersfield
3 fiber cement siding installers based in Bakersfield follow, further down the page.
Licenses checked · California Contractors State License Board
6.7 innormal precipitation a year
Rainfall and moisture load in Bakersfield
With February alone bringing 1.3 inches in a typical year, Bakersfield is the kind of climate manufacturers have in mind when they engineer a wet-climate formulation.
6.7 inches of total annual precipitation keeps every seam, joint, and piece of flashing on a Bakersfield wall working hard.
Data: NOAA National Centers for Environmental Information, U.S. Climate Normals 1991-2020 (annual/seasonal and monthly, by station) (1991-2020), from the nearest NOAA station 4.6 mi away.
What FEMA's risk index shows for Kern County
Two very different hazards for a Bakersfield homeowner to weigh, and fiber cement is one of the few common claddings that holds up against both at once.
- Strong wind
- Relatively Low
- Hail
- Relatively Low
- Wildfire
- Relatively High
Data: FEMA, National Risk Index for Natural Hazards - County-level table, v1.20 (v1.20, December 2025).
3 fiber cement siding installers based in Bakersfield, CA
Sorted A to Z by business name.
Max Baza Construction
Siding contractor
- License
- B General Building / C-39 Roofing / C-61/D-41 Siding and Decking · 923698
- Since
- 2008
- Expires
- Oct 31, 2028
- ZIP
- 93313
New Era Siding INC
Siding contractor
- License
- C-61/D-41 Siding and Decking · 1000181
- Since
- 2015
- Expires
- Jan 31, 2027
- ZIP
- 93313
Pioneer Construction
Siding contractor
- License
- B General Building / C-61/D-41 Siding and Decking · 557172
- Since
- 1989
- Expires
- Jun 30, 2027
- ZIP
- 93306
Fiber cement questions worth asking before you sign
- Is this product factory-primed or factory-finished, and if primed, will painting happen inside the manufacturer's required window?
- What ground clearance and roofline clearance will the crew actually leave, and does it match the manufacturer's published minimums?
- How will the crew control silica dust when cutting, and what equipment are they using outdoors versus indoors?
- If this home is in a fire hazard zone, is the specific product and assembly rated for it, not just the base material?
- What does the substrate warranty cover, separately from any paint or finish warranty?
- Is this formulation built for {city}'s climate zone, or a generic nationwide version?